Warn PN37880 Camouflage Medium Duty Winching Accessory Kit

Warn Industries PN37880 Medium Duty Winching Accessory Kit (with Camouflage Bag) contains 10-feet long and 0.3125-inch thick grade-7 choker chain with hooks, clevis D-shackle with 0.75-inch diameter pin, 19,000 pounds maximum capacity snatch block with grease port, 2-inch wide and 8 feet long tree trunk protector rated up to 14,400 pounds, Camouflage Cordura nylon soft case and Warn gloves. It’s designed for winches with capacities rated up to 9500 lbs. The camouflage bag keeps all the winching accessories together in a place.
37880 ACCESSORY KIT Warn PN37880 Camouflage Medium Duty Winching Accessory Kit

Medium Duty Winching Accessory Kit (part number #37880) includes
- 10′ of 5/16″ (3m of 8mm) grade 7 choker chain with hooks.
- 1 Clevis D-shackle 3/4″ (20 mm) pin diameter.
- 19,000 lbs / 8618 kgs maximum capacity snatch block with grease port.
- 2″ x 8′ (5cm x 2.4m) tree trunk protector rated to 14,400lbs / 6351kgs.
- Camouflage Cordura nylon soft case + gloves from WARN.

WARN MEDIUM DUTY WINCHING ACCESSORY KIT 37880 FEATURES

Model : Medium Duty Winching Accessories Kit
Part Number : Warn PN 37880
Designed for winches rated up to 9500 pounds with 0.31-inch wire rope
Camouflage bag keeps all the winching accessories in place
Has 10-feet long and 0.31-inch thick grade-7 choker chain with hooks
Includes 19,000 pounds maximum capacity snatch block with grease port
Comes with clevis D-shackle with 0.75-inch diameter pin

You’ll also need accessory kit for every winch you have, from Ramsey Winches, Warn Industries, T-Max, Superwinch or MileMarker. Most places where you are able to get a winch sell them or you can build your own. Make certain the accessories match or exceed the Warn winches capacity. You do not want them to break under load. Most importantly is a pair of heavy-duty work gloves. A winch cable can actually chew up your hands even if it’s in new condition. If it is a bit wore it can do a number on you. The next is a line doubling pulley-block or snatch block. For the name means you loop through the pulley back to the truck. Yeah it cuts the speed and distance you are able to pull but it doubles the amount of pulling power if you want it. It may not be needed along all or even real many pulls but when it’s needed it could be a real lifesaver. It can as well be used to change the pull direction. Suppose you prefer to pull another vehicle like trucks, jeep or 4×4 SUV vehicles (from any manufactures, Nissan Chevrolet, Jeep Wrangler, Dodge Ram, Hummer, GMC, Chevy, Toyota or Honda) for back onto a trail. The only place you may be able to park to clog straight pull is where you require to pull it.

By rigging at that location you can and then move further up or down the trail and pull from at that place. A tree trunk saver strap is a wide nylon strap with loops in the terminates to roll around trees and nicknack. As the name says it holds the cable from digging the tree. While you might not give a hoot about a tree it also protects your winch cable. Wrapping a cable wire around a tree and hooking the hook over the cable may be very destructive. The tight bend and the hook can seriously arrange a strain, kink or cut into the cable. Having and practicing a strap saves your cable and leastways makes you seem environmentally responsible in the eyes of the sheeple. A pair of shackles to offer connecting points are a really nice addition. While pulling always drape a blanket, coat or something over the cable. These slow down the whipping process if the cable happens to snap. A winch cable may cause serious injuries or damage whenever it breaks under a big load.